top of page

GOLD standard

24 Monthly £170

A full safety check of the bicycle component parts

  • Check the general condition of the bicycle frame and frame alignment. 

  • Degrease and relubrication of the drivetrain.

  • Front wheel hub, spokes and rim for serviceability. True any minor buckles (covers a range of 1 – 3 mm).

  • Front tyre & tube for condition and wear. Tyre inflated.

  • Front brake for serviceability and effectiveness, (adjusted if not functioning correctly).

  • Check for the security of the handlebars, grips, end caps, brake leavers and gears (if fitted).

  • Check the functionality and security of the headset.

  • Check for serviceability and security of the bottom bracket, crank arms and pedals.

  • Check for security and wear of the front chain rings, chain and front derailleur (including cable).

  • Check rear derailleur and rear cassette for wear, security and functionality (including cable).

  • Rear wheel hub, spokes and rim for serviceability. True any minor buckles (covers a range of 1 – 3 mm).

  • Rear tyre & tube for condition and wear. Tyre inflated.

  • Rear brake for serviceability and effectiveness, (adjusted if not functioning correctly).

  • Seat post and seat for serviceability and security.

  • Any fitted reflectors and safety items checked for security and serviceability. 

  • Strip down and service of both wheel hubs. 

  • Headset and bottom bracket inspected and serviced, including regreasing.

  • Remove and deep clean the drive train components and relubricate with specific
    customer requirements.

GOLD Overhaul extras

  • Full strip down of all component parts of the bicycle, wash, clean and regrease (lubrication) before a full
    rebuild of the bicycle. All torque settings in accordance with the manufacturers guidelines. 

  • Replace gear inner and outer cables (if required), index gears to function correctly.

  • Replace brake inner and outer cables (if required), adjust brakes to operate correctly.

  • If fitted with hydraulic brakes, the brakes will be bled and refilled with the appropriate DOT 5.1 or Shimano mineral oil as per the manufacturers guidelines. Brakes will be bled to function correctly.

  • Test ride of the bicycle to check for rider safety.

  • A copy of the inspection checklist and any key concerns provided to the customer.

bottom of page